STANDING SEAM · PAVER SYSTEMS · ARCHITECTURAL METAL
Tectum provides commercial building envelope services designed to protect properties against moisture, air infiltration, and Colorado’s demanding weather conditions. From exterior walls and waterproofing to flashing, joints, penetrations, and roof-to-wall transitions, our team identifies vulnerable areas and develops solutions that support the long-term performance of the entire building enclosure.
A building envelope functions as an interconnected system. Roofing, exterior walls, flashing, waterproofing, joints, and penetrations must work together to protect the interior from outside conditions.
Tectum evaluates these critical connections to identify deterioration, moisture pathways, and other vulnerabilities before recommending repairs or improvements.
Explore our commercial wall panels, including insulated metal panels and architectural rainscreen systems.
We identify areas vulnerable to moisture intrusion and provide appropriate waterproofing solutions to help protect the building.
Wall assemblies, exterior materials, and transitions are evaluated for damage, deterioration, and potential water-entry points.
Failed or deteriorated sealants around joints and penetrations can allow moisture and air intrusion. We identify and address these vulnerable areas.
Roof-to-wall connections, flashing, penetrations, and transitions receive focused attention because these areas frequently require precise detailing.
Water can enter through roofs, walls, joints, penetrations, flashing, or transitions. Identifying the actual source is essential before repairs begin.
Roofing and wall systems must connect correctly to create continuous exterior protection and reduce vulnerable gaps.
Hail, wind, snow, intense UV exposure, and temperature swings can gradually deteriorate exterior building materials and connections.
Gaps and deteriorated enclosure components can contribute to uncontrolled air movement and negatively affect building performance.
We inspect accessible exterior walls, roofing transitions, joints, flashing, penetrations, sealants, and other critical enclosure components.
Our team documents visible deterioration, potential moisture pathways, failed materials, and areas requiring corrective attention.
We determine the appropriate repair, waterproofing, sealing, or restoration strategy based on the building’s actual conditions.
Approved work is completed using appropriate materials and installation methods for each affected component of the building envelope.
Completed areas are reviewed and future inspection or preventative maintenance recommendations are provided when appropriate.
We inspect accessible exterior walls, roofing transitions, joints, flashing, penetrations, sealants, and other critical enclosure components.
Our team documents visible deterioration, potential moisture pathways, failed materials, and areas requiring corrective attention.
We determine the appropriate repair, waterproofing, sealing, or restoration strategy based on the building’s actual conditions.
Approved work is completed using appropriate materials and installation methods for each affected component of the building envelope.
Completed areas are reviewed and future inspection or preventative maintenance recommendations are provided when appropriate.
The building envelope is everything that separates the inside of the building from the weather: the roof, exterior walls and wall panels, flashings, coping, parapets, windows and doors, and the transitions between them. Tectum works on the roofing, wall panel and sheet metal components and the transitions that tie them together.
Common problems include failed roof-to-wall flashings, open coping and parapet joints, deteriorated sealant, wall panel joints that no longer shed water, clogged or undersized drainage, and moisture trapped inside the assembly. Many appear as roof leaks but originate in the walls or transitions.
Leaks that appear only during wind-driven rain, that show up on walls rather than under roof areas, or that occur without ponding on the roof often point to wall or transition failures. Tectum’s inspection, including infrared moisture scanning where conditions allow, traces the water path rather than guessing. The findings are documented with photographs.
Roof-to-wall transitions are where two different systems, installed by different trades, meet — and where most envelope leaks begin. Correct flashing height, counterflashing, termination bars and sealant at those transitions is what keeps water from entering behind the wall or under the membrane.
Yes. Hail, high-altitude UV, wind-driven rain and freeze-thaw cycles attack sealants, coatings, panel finishes and flashings. Regular inspection of the envelope, not just the roof, catches those failures before water reaches the structure or interior.
Often, yes. Reflashing transitions, replacing sealant and coping, repairing wall panel joints and correcting drainage are targeted repairs that resolve many envelope problems without replacing the wall or roof system. Tectum’s inspection documents which components can be repaired and which have reached the end of their service life.
Yes. Preventative maintenance that includes sealants, flashings, coping, drainage and wall panel details keeps the envelope performing as a system. Tectum’s maintenance visits and RAM inspections cover those details along with the roof membrane.
Explore related commercial roofing services that support replacement planning, including inspections, preventative maintenance, and roof asset management. These services help property teams understand roof conditions, plan next steps, and manage long-term roof performance.
Targeted repair of leaks, seams, flashings and storm damage, documented with photographs and matched to the existing roof system.
Scheduled inspections, A–F condition grading and photo reporting that keep commercial roofs performing and replacement planned, not forced.
Roof-to-wall transitions, coping, flashings and wall panels inspected and repaired as one system to keep water out of the building.
Custom coping, fascia, gutters, trim and flashings fabricated in-house and installed to fit the building and its roof system.
Every Tectum engagement begins with a documented roof assessment and a written findings report. You decide what comes next.
(719) 455-7663
